20-25 Jeep JT Gladiator Trailhead Series Mid Front Bumper Bolt On With Stinger Fairlead Mount And Factory Fog Provisions Lower Sway Bar Skid Excessive Industries
Description
Strength, style, and simplicity - the Excessive Industry Trailhead Series Mid-Width Front Bumper gives you all three at an unbeatable value. Designed for easy bolt-on installation and built with the same rugged quality as our Stubby version, this 51.25 Inch wide bumper is perfect for Jeep owners who want more coverage without sacrificing performance.
2020-2025 Jeep JT Gladiator Trailhead Series Mid Front Bumper (Bolt On) With Stinger, Fairlead Mount And Factory Fog Provisions, Lower Sway Bar Skid
- Affordable Quality Upgrade - Built to deliver premium performance and durability at a price point that makes sense.
- Rugged Construction - CNC cut, bent, and welded from 3/16 Inch P n O steel plate, with 1/4 Inch thick mounting plates and 1/2 Inch shackle tabs that tie through both the bumper and mounting plate for unmatched pulling strength.
- Winch-Ready Confidence - Internal gussets provide a reinforced mounting base for your winch. Add the welded fairlead mount for a complete recovery-ready Setup.
- Customizable Protection - Choose from a Stinger or Bull Bar, both built from 2 Inch .120 DOM tubing with 3/16 Inch gussets for serious impact resistance. Or go clean and simple with no grille protection at all.
- Fog Light Ready - Keep your factory fog lights with the easy add-on option, so you don’t sacrifice function for strength.
- Balanced Design - At 51.25 Inch wide, the mid-width bumper provides more coverage than the Stubby while maintaining high clearance for trail performance.
- Trail-Tested Durability - Years of testing and customer use without a single failure - strength you can trust mile after mile.
- Optional Add-Ons: Lower Sway Bar Skid or High-Clearance Rubicon Front Sway Bar Disconnect Skid (sold separately)
- Installation: All Grade 8 mounting hardware included
- Finish: Ships raw steel, ready for your paint or powder coat
The Trailhead Series was designed to bring you a high quality bumper with great looks and easy bolt on installation at an affordable price.
These bumpers are CNC cut, bent and welded from high strength 3/16 Inch P-n-O steel plate, feature 1/4 Inch thick mounting plates and 1/2 Inch thick shackle tabs that pass through both the bumper and the internal mounting plate for incredible strength and reliability.
Our bumpers have been put to the test for many years and have never once let us or any of our customers down.
Trailhead Series bumpers are all internally gusseted to increase strength and provide a sturdy mounting location for your winch. Just add the welded Fairlead Mount to receive a winch ready bumper!
Choose from either a Stinger or Bull Bar for your winch and grille protection. These addon's are built from 2 Inch .120 wall DOM tube and feature 3/16 gussets to increase strength against impact. If you prefer the simpler look, you can also order the bumper with no bar at all.
The mid width bumper measures 51.25 Inches wide. Looking for something narrower? Check out the stubby version of the Trailhead Series that measures just 40.5 Inches wide!
Installed photos shown with optional Lower Sway Bar Skid. Bumper will not include this skid unless added in the options below. You can also use our high clearance Rubicon Front Sway Bar Disconnect Skid with this bumper by purchasing it separately in the main section of the JL and JLU store.
- All Mounting Hardware Included
- Ships Raw Steel